IRIS-4 160
Quick Installation and
Maintenance Guide
IRIS-4 160
11
10
To initiate the Wi-Fi connection ensure that the
IRIS-4 160 has power and then depending whether
the front cover is on you have two options:
• Front cover on; use a physical ‘Tap Tap’ on the
cover around ½-second interval between .
• Front cover removed; press the button labelled
AP on the IRIS-4 160 .
Press or perform either the AP button or the ‘Tap
Tap’ and the SYS LED will change colour . For a
local access point connection via Wi-Fi the SYS LED
should be flashing ‘purple’, this indicates AP mode
activated and is awaiting a connection . You now
have a 30-minute time window to search and find the
‘IRIS’ network using either a smartphone, tablet or
laptop’s Wi-Fi connect search function .
Once the smartphone, tablet or laptop’s Wi-Fi
connects to this network, you will need to enter the
password; by default, the password is ‘password’ all
lower case .
Connecting to this should turn the SYS LED solid
‘purple’ and using the web browser connect to the
IRIS-4 160 web interface by browsing to ‘iris .local’ .
Configuration via Web Browser
using Wi-Fi Connection
Can be configured using the Wi-Fi connection using
a standard Web browser from any smartphone/tablet
or laptop device and supports the following network
security WEP/WPA/WPA2 .
The IRIS Web browser interface currently supports
the following operating systems .
Note: You may be required to install some
additional software for some operating systems:
Microsoft Windows.
Microsoft Windows based operating system (PC or
laptop device) will require the initial installation of
the Apple Bonjour service . Downloaded from the
following link:
http://support .apple .com/kb/DL999
Android and Window phones.
Android operating system and Microsoft Windows
phones will require the IRIS Connect App .
Available for Windows Phone or Android from the
App Store, simply search for ‘IRIS Connect’ .
Apple iOS.
Apple iOS operation system will work using the
Safari Web interface and already has the Apple
Bonjour service installed .
Once connected enter the default installer code:
111111 and then click Logon . You will be
prompted to change the password, please record
the new password . Enter and confirm a new
password and press Submit .
Note: Currently only communicating
with the IRIS-4 160 via its internal
Wi-Fi Access Point.
