Stereo Sound & CD-ROM
A:\CDROM\MITSUMI>SETUP lEntcr]
This program will guide you step by step lo setup CD-ROM device
driver parameters. Please refer to the section below to learn more
about how to change device driver parameters.
You may manually install the driver, by completing the following
steps:
Step 1. Use any text editor to add the following two lines to the file
"CONFIG.SYS"
under your boot hard disk root-directory
(Drive C in general).
ODevice=[drive:]\DE V\ MTMCDAS.SYS [/Drdevice name] [/P:xxx]
OLASTDRTVE =
drive letter
IDidevice name
specifies device driver name that is used by the Microsoft
MS-DOS CD-ROM extension file as MSCDEX. MSCD000
is the commonlv used device driver name, when none is
specified.
/P
*
XXX
xxx is the I/O port address as set on S1 of the sound card.
The default is 320H.
/Lastdnve:=i/n'vc
letter
Enter the proper drive letter name according to your system
configuration. For example, if you already have 3 hard
drives, use " f \ If this qualifier is not specified, the default
used by DOS is V.
Step 2. Add the following line to the file "AUTOEXEC.BAT" under
your boot hard disk root-directory (Drive C in general).
3 [drive: 1 [path] MSCDEX [/D:device name] [/M:n] [/E] [/V]
[IL:drive letter]
NOTE:
The actual MSCDEX.EXE command line in the autoexec.bat file
is not truncated and should be placed entirely on one line.
[drive:][path] MSCDEX.EXE
Page - 21
