15
Console Drive Cradle Installation
Ø
The console drive kit can be connected with IDE connection by default
or with an optional converter board or USIB cable.
Ø
If one of the USIB cable is use with the console cradle like USB2.0 or
Firewire the kit can be hot swappable. If serial ATA cable is use, the
serial ATA controller must support hot Swap feature for the kit to
work.
Ø
Power to the Console Drive is recommended using the regular 4-pin
Power connector coming from the computer’s power supply.
Ø
The power switch on the back of the Console Cradle must be set to the
Right to get power from the computer’s power supply.
