![background image](http://html.mh-extra.com/html/national-instruments/wsn-3295/wsn-3295_installation-manual_709639001.webp)
INSTALLATION GUIDE
NI WSN-3295 Outdoor IP Enclosure
For the NI 9792 WSN Real-Time Gateway
This installation guide describes how to install and use the National Instruments WSN-3295 outdoor IP
enclosure. The NI WSN-3295 outdoor IP enclosure is an accessory that provides the NI 9792 WSN
Real-Time Gateway with a minimum ingress protection (IP) rating of IP65 against dust and water in
harsh outdoor or industrial environments. For more information about IP ratings, refer to the
section. For the NI 9792 device specifications, refer to the
NI 9792 WSN
Real-Time Gateway User Guide and Specifications
available at
ni.com/manuals
.
Figure 1 shows the NI WSN-3295 outdoor IP enclosure components.
Figure 1.
NI WSN-3295 Outdoor IP Enclosure Components
Note
You need a #1 and a #2 Phillips screwdriver to install the NI WSN-3295.
1
Antenna IP Sleeve
2
2.4 GHz Antenna
3
Antenna IP Boot
4
Lock Nuts
5
Gland Shells
6
Gland Inserts, Reduced
7
Gland Inserts, Standard
8
Gland Plugs
9
Ethernet Field Termination
Connector Kit
10 Ethernet Interface Connector
11 Internal RJ45 Ethernet Cable
12 Internal Antenna Cable Connector
13 No-Crimp Ethernet Plug
14 4-40 Screws
— Quick Release Latches on
Enclosure (not shown)
1
2
5
6
7
8
4
9
1
3
3
11
12
14
10