NI WSN-3295 Outdoor IP Enclosure Installation Guide
6
ni.com
Step 5: Install the Antenna
Refer to Figure 5 to install the antenna assembly.
Figure 5.
Antenna Assembly Installation
To install the antenna, complete the following steps:
1.
On the outside of the enclosure, place the antenna IP boot onto the external antenna connector with
the smaller diameter hole out.
2.
Screw the antenna onto the external antenna connector until it bottoms out.
3.
Slide the IP sleeve down the antenna and over the IP boot until the IP sleeve touches the enclosure.
1
IP Boot
2
Enclosure
3
External Antenna Connector
4
Antenna
5
IP Sleeve
1
2
3
4
5