background image

 

20 

Technical Support 

 

If you need assistance to get your unit functioning properly, please call 
Addonics Technical Support.  Our technical staff will be happy to assist you, 
but they will need your help to do so.  Calling the technical support staff 
without all the proper information can be both time consuming and frustrating.  
Here are some tips to help you out: 
 
(1)

 

MODEL NUMBER – Please have this number on hand.  

(2) 

SYSTEM INFORMATION – Type of computer, peripherals, etc. 

(3)

 

  

OPERATING SYSTEM – What version of Windows  

 

(4)

 

  

WHAT’S THE TROUBLE? – Give enough information  
About your problem so that we can recreate and diagnose it. 

 

FREE Software Drivers for all Addonics Technologies 

Products are available 24 hours per day at the  
World Wide Web Site: 

www.addonics.com

 

Contact Information

 

 
Addonics Technologies 
2466 Kruse Drive 
San Jose CA, 95131 
 
Phone:   

408-433-3899 

Fax: 

 

408-433-3898 

Email:   

[email protected]

 

Internet: 

http://www.addonics.com

 

 

TECHNICAL SUPPORT 

Phone:   

408-433-3855 

Hours:   

8:30-6:00 PST 

Email:   

[email protected]

 

 

Please visit our web site 

www.addonics.com

 to register your warranty online. 

 

Содержание Console Drive USIB35






















Отзывы: