Additel 226, Руководство пользователя

Страница: 92 / 107

80
6.4.2 Loop signal source
1. Connect to DUT

Connect the DUT with the measurement module of the calibrator, as shown in the figure 7 (for current
measurement) or 6 (for voltage measurement).
2. Create the task
Create the corresponding DUT tasks as described above, and fulfill the necessary information. See Table 35.
Table 34 Loop signal source task setting
Subject Valid value Description
Name Numbers, letters, symbols Task name
S/N Numbers, letters, symbols Task S/N
Model Numbers, letters, symbols Model of DUT
Range (4~20)mA,(0~10)mA,(0~20)mA,(1~5)V,(0~5)V,(0~10)V, custom Output range of DUT
Accuracy 0.025%,0.05%,0.1%,0.16%,0.25%,0.4%,1%,1.6%,2.5%,4%,custom Accuracy of DUT
Transfer
function
Linear / square / square root Transfer function of the DUT
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.