ADDER View Matrix AVM208, Инструкция по установке и эксплуатации

Страница: 58 / 71

AdderView MATRIX Installation and Use Page 56
To edit the menu names and configuration settings:
You may open the AVMDATA.CSV using a spreadsheet program such as Microsoft
Excel. The format of a typical file is shown below. You will see that the computer
names (rows) are tabulated against the user profiles (columns). To grant a user
access to a computer, enter the value 1 in the box that is common to the computer’s
row and the user’s column. To deny access, leave this box blank. To add extra
users, add additional columns (up to 16 users). To add extra computers, add
additional rows (up to 512 computers). The ADMIN user will always be granted
access to all computers regardless of the values entered.
USERS ADMIN Alan Jim Sue Test
PASSWORDS password letmein hello logmein Test
COMPUTERS PORT
Admin PC 2103 1 1 1 1
Alan's System 2102 1 1 1
Comms Server 3 1 1
Comms PC 4 1 1 1 1
Gateway 1 8 1
Gateway 2 5 1
Test System 15 1 1
Web Browser 9 1 1 1
To restore the saved / edited menu and configuration settings:
1. Connect the serial port on the rear of the AdderView MATRIX to a serial COM
port on your computer using the serial cable supplied with the AdderView.
2. Copy the program AVMWRITE and AVMDATA.CSV into the same directory on
the PC that is connected to the AdderView’s serial port.
3. Run the program AVMWRITE.EXE and follow the instructions given by the
program.
4. Make sure that you are logged onto the AdderView as the ADMIN user. From the
main selection screen press F1 for
More Menus
. In the
Configuration Menu
select
Functions
. In the
Functions
menu select
Read Data from RS232 port.
5. The AdderView should then receive the configuration data to your computer and
load the new menu names and access rights into the menu.