ADDER View Matrix AVM208, Инструкция по установке и эксплуатации

Страница: 56 / 71

AdderView MATRIX Installation and Use Page 54
4.17 Using the AdderLink extender
Refer to the installation guide provided with your AdderLink extender.
When using an AdderLink extender we highly recommend that you set the
AdderLink's hotkeys to be different to the AdderView's hotkeys to avoid any
confusion
4.18 What to do if you forget your ADMIN password
If you forget your ADMIN account password you will not be able to access the
AdderView MATRIX to add or edit users and computer names. If this unfortunate
situation does occur then you can resolve it by performing a complete reset to return
the AdderView to its factory default state. A complete reset erases all the user
names and computer names that you have setup. You can only perform a complete
reset if you have access to both the front and the rear of the AdderView.
To perform a complete reset and return the AdderView to its factory default state:
1) Power on the AdderView normally.
2) Whilst the AdderView is powered on move switch 2 on the rear panel of the
AdderView (labelled UPGRADE) to the ON (down) position.
3) Press the USER and the COMPUTER keys together.
4) The green USER display will show 'r' for a few seconds to confirm that a reset is
taking place.
5) Return switch 2 to the normal OFF position (up).