ADDAC112 User’s Guide
page 16
ADDAC SYSTEM
LOOP EDITOR
The Loop Editor page allows to trim the current selected loop in
different ways allowing flexibility and precision.
All settings operate in real-time so besides precision editing it can
also be used as a playable feature.
Scroll up and down with the encoder, click the encoder to edit the
value, click once again to go back to parameter choice, hold the
encoder to exit Loop Editor.
The low resolution loop wave representation, Start and End points
can be seen at the bottom on the screen.
TIME
Sets the total time of the loop in seconds
SAMPLES
Sets the total time of the loop in samples
(1 sample = 1/samplerate)
BPM
Sets the total time of the loop in BPMs
START
Sets the start position in samples
END
Sets the end position in samples
EDIT WITH POTS
This setting allows the user to use the Rec Delay knobs: [REC DIVISION], [REC DEVIATION] and respective CV inputs; as
the start and end point controllers.
Rec Delay and Start/End points knob and cv input controls are exclusive and they’ll only work for one of the functions
at any time.
When this setting is set to ON the Rec Delay feature will keep the settings defined at that moment, the knob controls
will become inactive and not able to change the parameters until this setting is turned OFF.
This option is a global option and also apply while outside the Loop Editor Page.
CONSOLIDATE LOOP
Updates the current loop to the selected loop region, deleting everything not between the Start and End points.
NEW LOOP FROM EDIT
Creates a new loop with the selected loop region and places it at the end of the loop index.
New
