ADDAC112 User’s Guide
page 15
ADDAC SYSTEM
LOOPER ENGINE
(SPECIAL FUNCTIONS)
SD CARD
DUPLICATE LOOP:
Loops can be duplicated by pushing and holding the [MENU] encoder
button and then press [NEW REC].
The copied loop will appear at the last position in the loop index.
A message will appear stating: LOOP DUPLICATED
LOOP SIZE:
Using this shortcut will enter the Loop Editor, described further down in
this guide.
CLOCKED MODE:
In Clocked Mode the Stop Button and respective trigger input will work
as a Clock Input.
Clocked Mode changes the way the Looper Engine push buttons works,
In this mode buttons [NEW REC] [REC] [PLAY] [FORWARD/REVERSE] (and
their dedicated trigger inputs) instead of executing the actions immedi-
atelly they will engage once activated (shown by blinking) and will only
execute when the [STOP] button is pressed or a trigger on the Stop
Trigger input is detected.
This way a clock input can be plugged in the Stop Trigger Input and all
other Looper push buttons will be synced to the incoming clock, quantiz-
ing the timing of the user actions to the incoming clock.
NORMALIZE:
The loop volume can be normalized to -9db
by pushing and holding the
[MENU] encoder button and then press [REC].
SD CARD:
Any SD Card can be used but we recommend “Class 10” SD Cards, these will save/load Banks faster.
Cards above Class 10 won’t have any significant impact on the save/load times.
SD Cards should be formatted in FAT32 format.
If not saving or loading a Bank you can remove/insert an SD Card at any time.
