
L-861SE Clamp Band ERTE
96A0193 Rev. i
Product Introduction
© ADB bvba All Rights Reserved
6
2.2 Product
Introduction
This section describes the L-861SE threshold/end light. The L-861SE threshold/end light is
used to delineate the threshold/end of non-precision IFR runways.
The L-861SE light fixture consists of the following:
— A pair of inner lens doublets (3) coupled with a clear outer globe (1)
— Continuous clamping band (4)
— Inner spring clip (2) to hold two 180-degree inner lens segments
— Frangible coupling (7) that threads into a 1-1/2 12 NPT tapped hole in either a 30-inch
(762-mm) stake assembly or a 12-inch-diameter L-867 base cover plate.
The cast aluminum head and base assembly can be mounted on a standard
L-867 base plate or on a steel stake. Base mounting is easier to maintain and provides added
protection for the equipment. Stake-mounted lights require transformers, cables, and
connectors that are designed for direct earth burial.
Refer to Table 1 for mounting heights.
NOTE: The measurements in Table 1 are taken from the grade to the top of the light fixture.
Table 1:
Mounting Heights
The L-861SE light fixture is available with bidirectional white/red, white/green, red/green,
red/red, green/green, green/yellow lenses.
2.2.1 Compliance with
Standards
FAA
: FAA: L-861SE AC 150/5345-46 (Current Edition). ETL Certified.
2.2.2 Uses
L-861SE
— Runway threshold/end
— Non-precision IFR runways
Figure 1:
Cutaway View of L-861SE Light Fixture
Type
Height (in.)
Height (mm)
Standard (FAA minimum)
14
355.6
Standard
24
610
Standard (FAA maximum)
29
736.6
1. Outer Lens Globe
2. Inner Lens Spring Clip
3. Inner Lens Segment
4. Globe Clamp Band
5. Head Assembly
6. Column
7. Frangible Coupling
8. L-823 Cordset