manualshive.com logo in svg

ADB DOMINO 24, Руководство пользователя

Поделиться
Скачать
ADB DOMINO 24 Скачать руководство пользователя страница 25

DOMINO 24 & 48 USER MANUAL 

 

 

 

 

 

www.adblighting.com

 

User Manual - page 23 
Issue 1.2 
 

7.  THEATRICAL CROSS FADE 

7.1 OVERVIEW 

When you set the Mode to “Memory”, the 

Theatrical Memories

 can be played back 

sequentially. The X-FADE has two sides: Stage, which is effectively live (seen at the desk 
Output), and Preset, which is effectively blind (not seen at the Output). 
 
The Stage is the active part of the playback: its contents are sent straight to the output of the 
desk. The Preset contains the lighting state that will be used in the next crossfade.  

 

7.1.1

 

MODE SELECTION 

By default or after a complete reset the DOMINO will be in Wide Mode. 
Tapping on the Mode button will be a switch between Memory and Wide Mode. 
Holding the Mode button will be a switch between Memory/Wide Mode and A/B Mode. 

7.2  ASSIGNING THE X-FADE  

To playback the theatrical memory list, it must be copied into the x-fade. Press [

copy

], 

[

Preset

] or 

[Stage].

  

Pressing stage will put the first available 

theatrical memory

 into stage and the second 

available into preset.  
Pressing preset will empty the stage and will put the first available 

theatrical memory

 into 

preset. 

 

7.2.1

 

CHANGING THE ASSIGNED MEMORY IN THE PRESET 

To change the 

theatrical memory

 of the preset (always first 

theatrical memory

 assigned) 

HOLD [

PRESET

] and turn wheel to change the memory. 

7.3 X-FADE VIDEO 

To see a comprehensive display of the status of the X-Fade on the optional video output,  
HOLD [

function

], tap [

f/a

] (video 3). 

7.4 X-FADE MODES 

The X-fade can be set to operate in one of two ways, depending upon the status of the [Seq] 
button. 

 

7.4.1

 

NON-SEQUENTIAL 

In non-sequential mode, the playback will repeatedly fade between the two states that are 
loaded in the Stage and Preset. If one is empty, the fade will alternate between one lighting 
state and a blackout.  
The LED in the [Seq] button is off when in non-sequential mode, and “MAN” is shown on the 
x-fade monitor display. 

 

7.4.2

 

SEQUENTIAL 

Most theatrical shows which are strictly rehearsed will require sequential playback of 

theatrical memory

, either manually or automatically. When sequential mode is selected, the 

theatrical memory

 are played back in numerically sequential order, including any “point-

memories” numbers (such as memory 27.5). 
 

Содержание DOMINO 24





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды