manualshive.com logo in svg

ADB DOMINO 24, Руководство пользователя

Поделиться
Скачать
ADB DOMINO 24 Скачать руководство пользователя страница 16

DOMINO 24 & 48 USER MANUAL 

 

 

 

 

 

www.adblighting.com

 

User Manual - page 14 
Issue 1.2 
 

3.3 CROSS FADE (PLAYBACK) 

Diagram (3) 
The Cross fade (Playback) is an ordered list of actions that will run in succession through the 
playbacks; usually it is a list of memories. DOMINO has a Dipless Crossfade.  
A Crossfade is usually executed automatically (GO) but can be manually.

 

DOMINO’s playback has two faders:  

•

 

Stage:

 Effectively live (seen at the desk Output) 

•

 

Preset

: Effectively blind (not seen at the Output). 

3.4 CUE LIST 

Diagram (4) 
A Cue List is a recorded list of steps that are to be replayed in order. Each step consists of 
either a Memory, a chaser or a snapshot of the output.  

3.5 MASTERS 

Diagram (5) 

•

 

GRAB MASTER : 

Controls the overall level of the output of the Grab. 

•

 

FLASH MASTER : 

Controls the overall level of the output of the FLASH. 

•

 

GRAND MASTER : 

Controls the overall level of the output of the DOMINO. 

3.6  RECORD and EDITOR 

Diagram (6a, 6b, 6c) 

 

3.6.1

 

RECORD BUTTONS  

•

 

Record Memory

 to record a theatrical memory, submaster memory, snapshot of the 

output, a step in a Cue List 

•

 

Record Chaser 

to record a chaser

 

•

 

Record Cue List 

to record a Cue List

 

•

 

Assign Copy  

o

  Assign a Cue List to the Cross fade and Cue List master.

 

o

  Copy theatrical memories, submaster memories chasers or Cue Lists from 

one submaster to another.

 

o

  Copy theatrical memories, submaster memories, chasers or Cue Lists to or 

from the Grab master.

 

o

  Copy a Snapshot from the Grab master to a Submaster.

 

3.6.2

 

EDITOR BUTTONS 

•

 

SELECT BUTTON 

“Select” is most useful for making one off changes during a 

performance or for experimenting with changes without affecting the theatrical 
memories, submaster memories. 

•

 

EDIT BUTTON

 When pressed, it selects Edit mode. You may then choose to Edit any 

theatrical memory, submaster memory, Chaser, Cue List, the contents of the Grab 
master or the Patch (if previously selected via the function button).  

•

 

REMOVE BUTTON 

o

  Remove the contents of the Cross Fade, Cue List and Grab. 

o

  Delete theatrical memories, submaster memories, patches or steps of Cue 

List or Chasers. 

o

  Remove characters from names.  

Содержание DOMINO 24





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды