ADB CC/W, Руководство пользователя

Страница: 8 / 17

Operation
User Manual - page 6 www.adblighting.com
Issue 2.0
FAN SPEED
Switch 1 Description
Off LOW fan speed
On HIGH fan speed
CONTINUOUS /STEP mode
Switch 2 Description
Off
STEP mode
The movement of the gel string is divided into 16
steps, and each step corresponds to a separate
colour. For approximately every 6.7% change of
intensity level of the signal on the control channel,
the gel string will change one colour
On
CONTINUOUS mode
The movement of the gel string is divided into 100
steps, and its position is proportional to the
intensity of the signal on the control channel
POWER ON RESET
Switch 3 Description
Off
Power on reset disable
The gel string scrolls to the starting end to enter
the ready state. If there is a control signal from
the console, it will go to the desired position.
On
Power on reset enable
The gel string scrolls to the starting end then to
the other end, then back to the starting end again.
If there is a control signal from the console, it will
go to the desired position.
FAST / QUIET mode
This mode will only operate if gel string movement speed setting is «900». This switch
optimizes the gel string scrolling speed with quietness of operation.
Switch 4 Description
Off
QUIET mode
The colour changer is set to scroll the gel string at
low speed, 2.5 s. Noise from moving gel string is
reduced to the minimum.
On
FAST mode
The colour changer is set to scroll the gel string at
high speed, 1.5 s. Noise from moving gel string
might be generated.