ADB CC/W, Руководство пользователя

Страница: 6 / 17

Product description
User Manual - page 4 www.adblighting.com
Issue 2.0
2.7 System Configuration
The XLR4 connector on the motor-house provides DMX data and Power Supply
(24V DC / 1A) for
CC/WARP .
Adding the
CC/WARP
•
Insert the changer into the
WARP/M
.
•
Connect the safety cable.
•
Connect the XLR4 cable
1
.
•
Set the DMX address of the changer to 1.
•
Rebalance the
WARP/M
2
•
Power up the
WARP/M
.
DMX mapping for the
CC/WARP
WARP/M remaps the changer address. The changer becomes a part of the WARP/M personality.
CC/WARP has 3 parameters.
Channel 1 Colour (Position of String)
Channel 2 Fan Speed
Channel 3 Reset
In this case External 1 becomes colour, External 2 Fan Speed and External 3 enables a reset.
Removing the
CC/WARP
After you have removed the changer, you must rebalance the WARP/M .
Pin out definition of the 4 Pin output connector of
WARP/M
and
CC/WARP
PIN number Connector
1 COM
2 DMX -
3 DMX +
4 24 Vdc/1A
Case Shield ground
1
XLR4 cable with each CC/WARP ( ideal length to fit to WARP/M unit)
2
See user manual motorised WARP