ADB CC/W, Руководство пользователя

Страница: 12 / 17

Maintenance
User Manual - page 10 www.adblighting.com
Issue 2.0
Use High Temperature Transparent Polyester adhesive tape (e.g. 3M #853) to join the colour
filters side by side. Make sure that there is a good adhesion by pressing firmly on the tape
against the filters. Join the first and the last colour filter to the rollers. You can use the
reference line marked on the roller for alignment. Please note that the tape should be taped
on the side facing you on the rollers.
5.3 How to replace a gel string
Each gel string is mounted on 2 plastic rollers.
To replace a gel string:
1. release the latch to open the front door.
2. slacken the locking screw at the top of the roller holder.
3. release the roller holders at the top of the 2 plastic rollers.
4. remove the existing gel string from the rollers.
5. install the new gel string.
6. press down the roller holders to engage the 2 plastic rollers.
7. fasten the locking screw.
8. slightly turn the plastic rollers to ensure that they can freely rotate
9. close the front door.