ADB Safegate ACE2, Руководство пользователя

Страница: 13 / 46

This mode is executed as follows:
•
After a failure occurs, the CCR will switch ON to a predeter-mined brightness level without regard to the current step.
Smart Fail-safe Mode:
This mode is executed as follows:
•
If the CCR was switched ON before the failure, it will remain ON at the same brightness level.
•
If the CCR was switched OFF before the failure, it will switch ON to a predetermined brightness level.
Graphics User Interface (GUI)
The ACE2 graphic user interface (GUI) consists of the 128 x 64 pixel monochrome LCD display and four momentary switch
buttons. In typical modes of operation, the upper half of the LCD displays a monitored parameter or in the stand-alone mode
a configuration menu. The first string of the LCD lower half is reserved for warning and alarm messages in “reverse color”.
Reverse color means that the background is white and the text is blue. The second string is split to indicate several fields and
displays:
•
Brightness step. Reverse color means protective shutdown, blank – OFF.
•
Remote (“Rmt”)/Local (“Lcl” reverse color)
•
Primary power present (“PP”) / loss of power (“LoP” reverse color)
•
RS422 channel A message received ('A')
•
RS422 channel B message received ('B')
•
IRMS response received (small 'W'), megging has been reported (large 'W')
Specifications
Input Voltage: 85 to 256 VAC, 12 VA, 50/60 Hz
Input Power: 12VA maximum
Operating Conditions: -10 to +55 °C (+14 to +131 °F)
Altitude: Sea Level to 10,000 feet
Dimensions
Remote Mount: 13.3 × 10.4 × 3.9 in
(33.8 × 26.4 × 9.9 cm)
Wall Mount: 13.2 × 11.3 × 4.2 in
(33.5 × 28.7 × 10.7 cm)
Internal Mount: 13.2 × 10.3 × 2.7 in
(33.5 × 26.2 × 6.9 cm)
Combo Box: 20.0 × 20.0 × 8.7 in
(50.8 × 50.8 × 22.1 cm)
96A0357, Rev. G, 2019/11/08 7
Copyright
©
ADB Safegate, All Rights Reserved