11
M
ESSAGE
C
ONFIGURATION
The VoicePal Max can be configured to supply
either two, three, four, or ten messages, depending on the
operator’s needs. Message configuration is adjusted in
the Active state. If you wish to switch between 2, 3, 4,
and 10 message modes you should record new messages.
For beginning operators, it may be necessary to config-
ure the VoicePal Max to supply only two messages. As
the operator becomes proficient with two messages, the
VoicePal Max can be configured to supply three mes-
sages, then four, then ten.
T
EN
M
ESSAGES
SW1= ON (Active state), SW3= OFF, SW4= OFF.
Pressing Button 1 selects message one. Pressing Button
2 selects message two, etc. Each message can be up to 6
seconds (9 seconds with the 90 second model).
F
OUR
M
ESSAGES
SW1= ON (Active state), SW 3= OFF, SW4= ON.
Pressing button 1 or 2 selects message one. Pressing
button 4 or 5 selects message two. Pressing button 6 or 7
selects message three. Pressing button 9 or 10 selects
message four. Each message can be up to 15 seconds (22
seconds with the 90 second model). The space between
12
the right and left halves is intentional dead space.
T
HREE
M
ESSAGES
SW1= ON (Active state), SW3= ON, SW4= OFF.
Pressing button 1 or 6 selects message one. Pressing
button 3 or 8 selects message two. Pressing button 5 or
10 selects message three. Each message can be up to 20
seconds (30 seconds for the 90 second model). The
space between 1, 2, and 3 is intentional dead space.
T
WO
M
ESSAGES
SW1= ON (Active state), SW3= ON, SW4= ON.
Pressing button 1, 2, 6, or 7 selects message one. Press-
ing button 4, 5, 9, or 10 selects message two. Each
message can be up to 30 seconds (45 seconds with the 90
second model). The space between messages 1 and 2 is
