3-11
Using SCSISelect
2
Use the keys listed in the table below for the SCSI Disk Utilities
target selection screen as follows. Alternate keys, where
possible, are provided for terminal emulators that do not
support certain keyboard inputs:
3
To select a device
a
Press
↑
,
↓
, or Space to scroll through the list of devices.
b
When the device you want appears at the
Select Target
prompt, press Enter.
If you select an invalid entry, a message appears advising you
of the problem.
– Press Esc to return to the SCSISelect Options screen
or
– Press any other key to return to the SCSI Disk Utilities
Target Selection screen
Once a valid device is selected and accepted, SCSISelect
displays the selection and asks if you want to format or verify
the device, as in Figure 3-5.
Figure 3-5. Format or Verify Device Screen
Key
Function
↑
or
↓
Alternate: Space
Scrolls through the list of SCSI IDs.
Enter
Accepts the setting for the selected device.
Esc
Returns to the SCSISelect Options screen,
returns to the Target Selection screen, or
aborts an operation.
?
For some fields, displays a Help screen.
SCSI ID:
4 UNIT:
0-Disk
-CONNER CFP1060W
Do you wish to format or verify the device? [VERIFY]
