3-1
3
▼ ▼ ▼ ▼
Using SCSISelect
The SCSISelect
utility enables you to change host adapter and SCSI
configuration settings directly from your computer’s desktop.
SCSISelect also contains utilities that allow you to low-level format
or verify the disk media of your SCSI hard disk drives.
You can use SCSISelect directly from the P1275 User Interface.
Selecting a Single-Chip Host Adapter with the
P1275 User Interface
To select a single-chip host adapter with the P1275 User Interface:
1
Enter the system’s Forth evaluator.
2
To display a list of attached devices, type the following
command at the
ok
prompt (also known as the Forth prompt,
Forth evaluator, or ROM monitor):
show-devs
3
From the
ok
prompt, select the Adaptec single-chip host
adapter to be configured. The word select is used to establish a
device instance for the adapter. For example, to select a single-
chip host adapter, type the following command:
select /pci/pci@2/scsi@4
Some systems may allow abbreviated forms of the device path
name for selection, for example:
select /pci/@2/@4
