3-12
AHA-2940UW/OF and AHA-2944UW/OF User’s Guide
4
Select Verify or Format.
These options are explained in the following sections.
Using the Verify SCSI Disk Media Utility
To use the Verify [SCSI disk media] utility
1
Select Verify.
A safety prompt appears to verify the selection (Figure 3-6).
Figure 3-6. Verify Message Screen —Executing the Utility
2
To execute the utility, press Enter; to discontinue, press Esc.
The Verify utility sequentially scans the selected device’s
media for defects. A screen similar to the one in Figure 3-7
appears.
Figure 3-7. Verify Message Screen — Defect Scanning in Progress
-----------------------------Verify-----------------------------
This drive will be scanned for media defects. All recoverable defects
will be remapped. Once started, media verification may be aborted at
any time by pressing the <Esc> key.
Press <Enter> to initiate; <Esc> to abort
-----------------------------Verify-----------------------------
This drive will be scanned for media defects. All recoverable defects
will be remapped. Once started, media verification may be aborted at
any time by pressing the <Esc> key.
SCSI ID: 4 UNIT: 0-Disk
-CONNER CFP1060W
Capacity: 2074880 blocks-Block Size: 512 bytes
Verifying...20% complete-block 417792
