3-3
Using SCSISelect
1
To select an option
■
Press
↑
,
↓
, or Space to scroll through the options:
Configure/View Host Adapter Settings and SCSI Disk
Utilities.
■
When the option you want appears at the Select Option
prompt, press Enter.
2
To exit SCSISelect, press Esc in the SCSISelect Options screen.
Using the Configure/View Host Adapter Settings
1
Select Configure/View Host Adapter Settings from the
SCSISelect Options screen.
SCSISelect scans the device’s PCI bus for other devices
identical to the one selected. If SCSISelect locates other
identical devices, the utility displays a list of these devices,
including the originally selected device. Figure 3-2 shows an
example of this list.
Figure 3-2. Configure/View Host Adapter Settings Screen for Identical
Devices
The device from which SCSISelect was activated is shown in
the header. Additionally, the word active, in parenthesis,
appears to the right of the device information.
When the active device is reset (which occurs during system
initialization), various device configuration settings, such as
initiator support for Wide SCSI or automatic cable
termination, may be altered to accommodate the device’s
environment. Because SCSISelect does not know the
-------------[ Configure/View Host Adapter Settings ]-------------
-------------[ AHA-294XU/UW/D - Bus
1 - Device 4 ]-------------
Name
Model
Bus
Device
AHA-294XU/UW/D
ADPT,AIC-7881
1
4
(active)
pci9004,8178
ADPT,AIC-7881
1
5
{<Space> to select device
<Enter> to accept device
<Esc> to exit}
Select Host Adapter to Configure: [Device 4]
