
Chapter 7: Installing the Driver and an Operating System
●
53
Installing with FreeBSD
Note:
You will need your FreeBSD Installation CD to complete this task.
To install the driver when installing FreeBSD:
1
Insert the FreeBSD Installation CD.
2
Restart your computer.
3
When the FreeBSD start screen opens, select
6
to escape to loader prompt.
4
Type
load kernel
.
5
Insert the driver floppy disk.
6
Type
load disk0:aacu.ko
.
If the driver fails to load, run lsdev and check for the floppy disk drive. Then, try again with
the appropriate device.
7
Type
boot
.
8
Complete the FreeBSD installation, following the instructions included with your
operating system.
9
Reboot your computer, then remove the driver disk.
10
Repeat Steps
3
through
7
the first time you boot the operating system to load the drivers
again for the initial bootup.
Note:
Currently, ICP Storage Manager is not supported on FreeBSD. To create and manage
arrays, use the
ICP RAID Configuration
utility. See
page 62
for more information.