Adaptec 131CA - AAA RAID Controller, Инструкция по установке и эксплуатации оборудования

Страница: 56 / 62

C-4
AAA-131CA Installation and Hardware Guide
❒
Command Line Options for aspicd.sys
Option Example Use
/d: <name> /d:aspicd0 Required in the config.sys command line. Assigns a
name to the CD-ROM drive so that mscdex can assign
the CD-ROM a logical drive letter. The name must
exactly match the CD-ROM drive name in the
mscdex
command line in autoexec.bat. Use any eight-character
name.
/id=
{…}
/id=2+4
/id=3+5+1:4 Specifies CD-ROM drives controlled by
aspicd. By
default, aspicd controls all drives. In the first example,
for a computer with one host adapter,
aspicd controls
the devices with SCSI IDs 2 and 4. In the second exam-
ple, for a computer with two host adapters,
aspicd con-
trols the devices with SCSI IDs 3 and 5 on host adapter
0 and SCSI ID 4 on host adapter 1 (if you do not specify
the host adapter number,
aspicd assumes it is 0).
/L /L Enables aspicd to recognize all eight possible LUNs
associated with each SCSI ID. If the option is not used,
aspicd can recognize only LUN 0 for each SCSI ID. Add
the /L option to the command line if you have a
CD-ROM drive that can access multiple discs.
If your computer system includes a Pioneer DRM-600
or DRM-604x multiple-disc CD-ROM drive, you do not
need to add the /L option. The
aspicd device driver
automatically scans multiple LUNs if it detects one of
these devices on the SCSI bus.
/norst /norst Prevents aspicd from issuing a SCSI Bus Reset mes-
sage at system start-up. The default is to issue it. The
SCSI Bus Reset message (supported by Toshiba,
Hitachi, and NEC drives) resets drives that are playing
audio CDs when the computer reboots.
/pause /pause Makes your system pause after loading
aspicd at
bootup, so you can read the message on the screen.
Press any key to resume booting.
/type: <drive vendor> /type:sony Allows aspicd to support audio play mode for CD-ROM
drives that are compatible with a supported drive type
but are not included on the list of supported drives. If
you use the /type:
<drive vendor> option, aspicd
assumes that all CD-ROM drives on the SCSI bus are
made by this vendor—you cannot combine different
brands of CD-ROM drives on the bus. The valid entries
for this option are chinon, denon, hitachi, lms, nec,
panasonic, sony, texel, and toshiba.