Adaptec 131CA - AAA RAID Controller, Инструкция по установке и эксплуатации оборудования, Страница: 47 / 62

5-7
Configuring the AAA-131CA Adapter with SCSISelect
■
Send Start Unit Command —This option determines whether
the Start Unit Command is sent to the SCSI device at bootup
(most devices do not require this). The default setting is No.
■
Include in BIOS Scan —This option determines whether the
AAA-131CA BIOS controls hard disk drives connected to the
adapter. When set to Yes, the BIOS controls the hard disk drive.
When set to No, the BIOS does not control the hard disk drive,
and device driver software is needed to control the device. The
default setting is Yes. You should leave the setting at the default
for all drives that are part of an array.
Additional Options
Array1000CA BIOS
This option determines whether the AAA-131CA BIOS is installed at
boot time. When set to Enabled, the AAA-131CA BIOS is installed,
and all Int13 devices are supported. When set to Disabled, the
AAA-131CA BIOS is not installed. The default setting is Enabled.
BIOS Support for Bootable CD-ROM
This option determines whether the AAA-131CA BIOS supports
booting from a CD-ROM drive. When set to Enabled, the
AAA-131CA BIOS allows booting from a CD-ROM drive.
❒