Adaptec 131CA - AAA RAID Controller, Инструкция по установке и эксплуатации оборудования

Страница: 38 / 62

4-6
AAA-131CA Installation and Hardware Guide
11
Add other types of host adapters if necessary (see Step 4
above), or click Close to exit the SCSI adapters portion of
Windows NT Setup, and then close the program.
12
When you see this message, click OK to exit:
The changes you have made will not take effect until the computer is
restarted
If this message does not appear, no changes have been made to
the Windows NT system configuration.
13
Restart your computer and Windows NT. Some drive letter
assignments may change from the previous configuration.
Windows NT 4.0
To install the cda1000.sys driver when Windows NT 4.0 is already
installed, follow these steps:
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, and then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Adaptec Array1000CA Family Manager Set drivers
diskette into drive A; enter the following path to the installa-
tion files and then click OK.
a:\winnt
The Adaptec Array1000CA Family Adapter is highlighted by
default.
8
In the Install Driver window, Click OK.
9
Click the New button when asked if you want to use the cur-
rently installed driver(s) or install new one(s).
10
Type a:\winnt again, and click Continue. The driver is now
installed.