3-7
Installing the Driver
c
From the Main Menu, select Create Driver Disk(s)
d
Click on the appropriate driver disk option and then click
OK.
e
When prompted, insert a floppy disk and click OK.
f
The system formats the disk and writes the appropriate
information to it.
g
When prompted, remove and label the driver disk. Then,
click OK.
3
Restart the computer.
4
If creating an array, proceed to
. For a simple volume, skip
to
5
Press Ctrl-A when prompted to enter the Adaptec RAID
Configuration (ARC) utility. You will use ARC to create the
array and logical drive that you will use to install Linux. (For
more details about the ARC utility, see
6
From the ARC menu, select Array Configuration Utility
(ACU).
7
From the ACU menu, select Create Array.
8
Select the drives for the new array and press Insert.
Note:
If your drives are shown in gray and cannot be used,
they probably need to be initialized. See
for details.
9
Press Enter when both drives for the new array are selected.
The Array Properties menu is displayed.
