5-22
Using Adaptec Storage Manager – Browser Edition
Type indicates how the segment is used. The first and last segments
may be reserved. The controller may store the RAID signature at
either the beginning or end of the drive. The end of the drive is
where the capacity may be rounded down to the nearest 2 MB.
If this segment is a component of an array, type indicates the array
level the segment is used in. If the segment is not used in an array,
and is not a reserved area, it will be shown as available.
Detailed view defaults to displaying the numbers of the start and
end blocks of each segment in decimal values. A drop-down list is
provided to allow you to display these numbers in either
hexadecimal or capacity.
S.M.A.R.T.
For hard disk drives that support S.M.A.R.T. predictive failure
reporting, this additional tab will appear with the following
entries:
■
Enabled
—indicates if S.M.A.R.T. reporting is enabled on this
device.
■
Predictive failure occurred
—indicates if this device has
reported a predictive failure.
LED
This tab appears on hard disk drives, and has two buttons, Blink
LED
and Unblink All.
■
Blink LED
—Clicking this button will cause the activity LED of
the selected drive to blink. Use this to identify the drive. The
activity LED will continue to blink until you click Unblink All.
■
Unblink All
—Clicking this button cancels the effect of the
Blink LED
button for all drives.
Enclosure Properties
Selecting an enclosure and clicking Properties will open a screen
with the following tabs: General, Fans, PSU, Temperature,
Devices
and Speaker.
