5-21
Using Adaptec Storage Manager – Browser Edition
Physical Device Properties
If you select a device on a channel (other than an enclosure) and
then select Properties, a window with Drive Info, Capacity, LED,
and S.M.A.R.T. tabs appear.
Drive Info
■
Status
—This field appears only for disk drives and it indicates
the current status of the drive. Possible values are: Optimal,
Failed, Phantom (not physically found), S.M.A.R.T. Warning,
Unknown and Missing.
■
Type
—The class of device; for example: disk drive, CD-ROM,
scanner, or printer.
■
Product
—The name given to this device by its vendor.
■
Vendor
—The manufacturer of this device.
■
Revision
—The version number information stored on the
device.
■
Data Rate
—The data transfer speed negotiated between the
controller and this device.
■
SCSI ID, LUN
—For devices on a SCSI channel the SCSI ID and
LUN of the device are reported. These do not apply for ATA
and Serial ATA devices and will always return 0.
Capacity
The Capacity tab appears only for disk drives and when selected,
displays a summary view listing the reserved, used, available, and
total capacities of the drive.
The capacities are reported in both the number of 512-byte blocks
(shown in both decimal and hexadecimal values) and capacity in
Kilobytes, Megabytes, or Gigabytes.
Selecting the detailed option shows information for all segments on
the drive. In this view, the following information is displayed for
each segment:
■
Number of the segment
■
Start and end blocks
■
Segment size and type
