ADE- 2022-C
Page 9 of 50
5.6
5.6
5.6
5.6
Electrical Connection
Electrical Connection
Electrical Connection
Electrical Connection
The Adande
®
drawer should be connected to a 230V, single phase, 50 Hz, standard
socket outlet supply. The drawer is connected to the mains supply with a detachable
supply lead, one end of which is fitted with a standard 13 amp 3 pin plug (fused at 13A).
The other end of the supply lead, fitted with an appliance plug, is connected to the
Adande
®
drawer as shown in
figure 3a
below.
Figure 3a: Mains connection point
The unused socket on the right hand side in
figure 3a
can be used to provide a mains
supply to additional Adande
®
Drawers as shown in
figure 3b
below.
Figure 3b: Mains connection point
DO NOT REMOVE ACCESS PANELS WITH
DO NOT REMOVE ACCESS PANELS WITH
DO NOT REMOVE ACCESS PANELS WITH
DO NOT REMOVE ACCESS PANELS WITH THE ELECTRICAL SUPPLY CONNECTED.
THE ELECTRICAL SUPPLY CONNECTED.
THE ELECTRICAL SUPPLY CONNECTED.
THE ELECTRICAL SUPPLY CONNECTED.
Unique Serial
number of the
unit: This
should be
quoted when
requesting a
service visit
Single
‘P’clip for
retaining
mains
cable