EN
FAC-SIMILE
FAC-SIMILE
ADAM PUMPS Spa
Via della Resistenza 48
41011 Campogalliano
Modena Italy
2 0 1 6
J A N
Code : PB0852000
PUMP PB 12V-85
12 Volt - 440W - 36 A - 2600 rpm
Weight Kg.: 7.5
Batch of
Model
Description
Technical specifications
Weight
EC DECLARATION OF CONFORMITY
(Annex II A DIR. 2006/42/EC)
THE MANUFACTURER
ADAM PUMPS S.p.A., with its registered office in Via della Resistenza, 46/48, 41011, Campogalliano (MO), ITALY; represented by
Davide Stassi, authorised to compile the relevant technical file at the undersigned premises,
DECLARES THAT THE MACHINE
Used as a diesel fuel pump to be integrated into a system for transferring fuel from a gravity tank.
COMPLIES WITH DIRECTIVES
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC.
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility.
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the
Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits.
Applicable only for AC powered products.
the use and maintenance manual must be carefully stored near the machine in an environment protected against
humidity and heat. The manual must accompany the machine if sold. It is prohibited to damage, modify or remove any
part of the manual.
USE AND MAINTENANCE MANUAL
Machine
: DIESEL FUEL PUMP
Models
:
PB 50, PB1 50 (12-24V), PB 60, PB1 60 (12-24V),
PB 85, PB1 85 (12-24V)
Place and date of the document
Campogalliano, January 14, 2020
The legal representative
TABLE OF CONTENTS
1 - GENERAL WARNINGS
2 - MACHINE SPECIFICATIONS
2.1 Intended use
2.2 Description of the machine
2.3 Technical specifications
3 - OPERATING CONDITIONS
3.1 Environmental conditions3.2 Power supply3.3
Allowed fluids / Forbidden fluids
4 - TRANSPORT AND HANDLING
4.1 Transport
4.2 Unpacking
4.3 Storage
5 - INSTALLATION
5.1 Preliminary checks and positioning the pump
5.2 Hydraulic pipe connection
5.3 Remarks on the suction and discharge lines
5.4 Electrical connection of the pump
6 - INTENDED USE
6.1 Preliminary checks and start-up
6.2 Daily use
6.3 Noise level
6.4 Compatibility in an electromagnetic environment
7 - TROUBLESHOOTING
8 - MAINTENANCE
9 - DEMOLITION AND DISPOSAL
10 - WARRANTY
11 - TECHNICAL SUPPORT
