This function permits to exit from MASTER mode and pro-
vokes a display reset. If no display reset is desired, just wait 60 seconds. Else press once
when display shows “exit.
It shows successively following information:
1. Product name: ”DI FLOW”
2. Firmware version: “r1.0”
3. Current unit of measure: “Unit” “Litres”
4. Current calibration factor (imp/l): ”CAL” “40.00”
5. Machine code: “codMAC” “0”
The display reset can also be done starting from “USER” mode, press
&
simultane-
ously for 2 seconds. With this procedure, nothing will be erased.
USER FUNCTIONS
The system if left untouched or if not receiving any pulses for at least 60 seconds automatical-
ly goes back to “Partial” screen i.e. USER mode, screen from which transactions are initiated.
This mode can be accessed by anyone even without and TAG or card. Each time button is
pressed, following screens sequence will be displayed:
1)Total, preceded by message “Total Litres”
2)Total period, preceded by message “TotPer”
SCREEN “EXIT” MESSAGE “EXIT” AND RESET DISPLAY
28
AF 3000 - AF 3000 TAG
