Adam Equipment WBW 16/35a, Краткое руководство

Страница: 11 / 16

P a g e
9
© Adam Equipment Company 2009
7.0 ERROR MESSAGES
During the initial power-on testing or during operation, the indicator may show an error message. The
meaning of the error messages is described below.
If an error message is shown, repeat the step that caused the message. If the error message is still shown
then contact your dealer for support.
ERROR
CODE DESCRIPTION POSSIBLE CAUSES
Err 1 Time input Error Invalid time entry such as “268970” for the time
format “H-m-S”.
Err 2 Date input Error 34th day of a month is an invalid entry.
Err 4
Initial Zero is greater than allowed
(4% of maximum capacity) when
power is turned on or when the
[Zero/Enter] key is pressed. Weight on the platform when turning the
indicator on.
Excessive weight on the platform when zeroing
the indicator.
Platform is not installed.
Improper calibration of the indicator.
Damaged load cell.
Damaged Electronics.
Err 6 A/D count is not correct when turning
the indicator on. Load cell is damaged.
Electronics is damaged.
Err 7 Percent input error Percent function is entered with no reference
mass on the platform.
Err 8
High limit input error Low limit is set first, then the high limit is set
lower than the low limit and high limit not equal
to zero.
Err 9 Low limit input error High limit is set first, then the low limit is set
higher than the high limit and low limit not equal
to zero.
FAIL H or
FAIL L
Calibration error Improper calibration (should be 10% of
the factory calibration). The old calibration data
will be retained until the calibration process is
complete.