Adam Equipment PMB 163, Инструкция по эксплуатации

Страница: 30 / 83

28
| P a g e © Adam Equipment Company 2017
When storing a test procedure the user has the option of adding a text or
numeric name to the test. The top display will show “PST NAME” then show
“- - - - - - - - - “. To enter a name, use the
[Dspl/  ] or [Test/  ] keys to cycle
through numbers and letters. Use the [PST/

] or [Print/

] key to move the
flashing digit to the left or right.
— . / 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Up to 10 characters can be used to describe the test. Press
[Setup/Enter]
at any time to finish the description. If no name is added the field will be
shown as blanks when the name is shown during the recalling process.
6.3 RECALL TEST SETTINGS
Recalling the test settings can be done by selecting “PST RECALL” then
scrolling through the stored settings using the
[Dspl/  ] or [Test/  ] keys to
find the desired settings and then pressing the [Setup/Enter] key to recall
them. When the PST XX number has been selected the name given to the
test will be displayed
If PST 00 is selected the default test settings are recalled. These can never
be cleared or overwritten. If a test is not stored it is not displayed, i.e. If only 3
tests are stored then only those 3 plus the default are seen when recalling the
test settings.
BREAD-4 PST NAME