Adam Equipment Company 2014
Manufacturer’s Declaration of Conformity
Adam Equipment Co.
Maidstone Road, Kingston
Milton Keynes, MK10 0BD
United Kingdom
This product has been manufactured in accordance with the harmonised European standards,
following the provisions of the below stated directives:
2004/108/EC, Electro Magnetic Compatibility
Directive
Standard EN61326-1:2013, Electrical
Equipment for Measurement, Control and
Laboratory Use – EMC requirements – Part 1:
general requirements.
2006/95/EC, Low Voltage Directive
Standard EN61010-1:2010, Safety
requirements for measurement, control and
laboratory use equipment – Part 1: General
requirements.
2011/65/EC, RoHS, on the Restriction of the
use of certain hazardous substances in
electrical and electronic equipment
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. The
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Shielded interconnect cables must be employed with this equipment to insure compliance with the
pertinent RF emission limits governing this device.
Changes or modifications not expressly approved by Adam Equipment could void the user's authority
to operate the equipment.
The Waste Electrical and Electronic Equipment Directive (WEEE) 2002/95/EC
This symbol indicates that the equipment carrying this mark is classed as Electrical or Electronic Equipment
(EEE) by European Directive 2002/95/EEC and must NOT be thrown into general waste but should be collected
separately and properly recycled under local regulations. Adam Equipment Co. Ltd. is dedicated to minimizing
the impact our products have on the environment and to complying with the WEEE Directive and any
amending legislation. We are a member of a registered recycling scheme and contribute to the costs of
collecting and recycling all our products. At the end of the life of this product, please arrange for collection or
disposal at a recognised centre so it can be recycled using techniques that reduce waste and do not introduce
or release hazardous substances harmful to our health or the environment. Contact us via our website if you
need any assistance or advice on correct disposal.
