3.3 SETTING UP THE BALANCE
•
The balance should be placed on a firm and stable surface.
•
The balance must be levelled. Level the balance by turning the
adjustable feet until the bubble in the level indicator on the balance
comes into the circle completely.
•
Place the pan support and the pan on the balance.
•
Plug in the power supply.
3.4 SHIPPING PROTECTION
This ADK balance has protection for the weighing mechanism that must
be removed before the balance is used.
Weigh below
Attachment
Shipping Protection
ADK BALANCE
•
To remove the shipping protection, remove the pan then place the
balance on the table upside down.
•
Remove the cover over the protection screw by loosening 2 screws.
•
Remove the protection screw, place in a safe place in case it is
needed for shipping the balance again. Replace the cover.
@Adam Equipment Company 2005
5
