Adam Equipment ADK 10, Руководство пользователя

Страница: 14 / 20

@Adam Equipment Company 2005
12
•
Keep your balance clean and dry.
•
Don't use solvents to clean the balance.
•
Protect the internal parts from liquid spills and excessive dust.
CLEANING
•
Unplug the power before cleaning.
•
Do not use any aggressive cleaning agents (solvents or similar
agents).
•
Use a piece of wet cloth with mild detergent (soap)
•
Be careful that no liquid enters the balance housing. After cleaning,
wipe down the balance with a piece of soft dry cloth.
7.0 RS-232C INTERFACE
This RS-232C interface is compatible with most RS-232C interfaces as found on
printers and PC’s.
7.1 RS-232C SPECIFICATIONS
Transmission Asynchronous transmission, unidirectional.
Data Format Baud rate : 9600
Data bits 8 bits
Parity None
Stop bit 1 bit
Code ASCII
Connector DB-25P
Pin 1
Case Ground
Pin 2 Data Output
Pin 5 CTS, to RTS on PC or Printer
Pin 6 DSR to DTR on PC or Printer
Pin 7 Signal Ground
7.2 DATA OUTPUT MODES