3.0 INSTALLATION
3.1 LOCATING THE BALANCE
•
The balances should not be placed in a location
that will reduce the accuracy.
•
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
•
Avoid unsuitable tables. The table or floor must
be rigid and not vibrate.
•
Avoid unstable power sources. Do not use near
large users of electricity such as welding
equipment or large motors.
•
Do not place near vibrating machinery.
•
Avoid high humidity that might cause
condensation. Avoid direct contact with water. Do
not spray or immerse the balances in water.
•
Avoid air movement such as from fans or opening
doors. Do not place near open windows or air-
conditioning vents.
•
Keep the balances clean. Do not stack material
on the balances when they are not in use.
3.2 UNPACKING YOUR BALANCE
Remove the balance from the carton carefully. It is recommended to keep the
packaging materials for storing or transporting again, if necessary. In the carton
you should find this balance together with:
9
Pan
9
Pan support
9
This instruction manual
@Adam Equipment Company 2005
4
