1. AUTO OUTPUT MODE
When the balance is connected to a printer or a computer and it is turned on, the data in the
balance will be output continuously unless you the balance, the printer or the computer is
turned off.
2. PRINT KEY MODE
In the condition of print key mode, when the
[Print]
key is pressed, one group of data will be
output.
SETTING OF OUTPUT MODES
Press
[Print]
for about 4 seconds-
•
It will be in the Auto output mode when “Print 1” is displayed.
•
It will be in Print key output mode when “Print 2” is displayed- in this case every time
[Print]
key is pressed, data output will be done once.
Note:
When in Auto output mode, if the [Print] key is pressed for 4 seconds it will switch over to the
Print key mode.
When in Print key output mode, if the [Print] key is pressed for 4 seconds it will switch over to
the Auto output mode.
DATA FORMAT
WS, +1234.5678 g <CR> <LF>
WU, + 1222.5645 g<CR> <LF>
WS = stable
WU = unstable
<CR> = carriage return
<LF> = line feed
@Adam Equipment Company 2005
13
