Ada GroundDrill-12, Руководство по эксплуатации

Страница: 4 / 34

MEASUREMENT FOUNDATION
Ground Drill - 12 Drill - 12
CHECK BEFORE START-UP
Check all bolts and nuts are securely tight. Tighten where necessary.
Check the cutting blades to avoid chipping, cracking or bending. NEVER use a drill when damaged.
CAUTIONS DURING USAGE
Do not allow other persons within 5 meters of the worksite. IT IS DANGEROUS for pets and children to be near the equipment
when operating.
Be careful when drilling through rocky ground. This equipment may rotate in reverse and damage.
Work only in a stable position.
Be sure to stop the engine before allowing persons to approach within 5 m of the equipment.
Do not allow children or anyone who is unskilled in equipment usage to operate the equipment.
Never touch the drill bit when the engine is running. Be sure the engine is off and the drill has stopped rotating before handling.
Beware of the rotating drill bit.
Be sure the drill bit has stopped moving before placing on the ground.
When deep drilling, do not attempt to complete work in one stretch. Extract soil in 2 or 3 steps.
Before servicing the auger or making repairs, always stop the engine, remove the plug cap from the spark plug and allow the engine
to cool down.
Before storing the auger drain all remaining fuel and wipe the equipment clean of dirt and debris.
NEVER store the auger near live lames.