Ada GroundDrill-12 Скачать руководство пользователя страница 3

Drill - 12

MEASUREMENT FOUNDATION

Ground

Drill - 12

Drill - 12

3

1. Introduction

Power auger Ground Drill 12 is used for work with two operators. During operation seizure of the auger may occur and the equip

-

ment may rotate in reverse. That’s why both operators must be very careful during operation and know and follow all precautions 

and possible risks. Return stroke is partly reduced by the power auger structure. You should know how to use the instrument to avoid 

damages.

2. Precautions

Wear a long-sleeved shirt and long pants closed at the cuff.

Do not wear neck-tie or other loosely danging garments. Such articles may become entangled in the drill when working.

Wear protective goggles.

Wear helmet when working.

Wear work shoes equipped with no-slip tread.

 Wear ear plugs to protect the ear drum from noise.

Do not work for long periods of time in summer and winter. Take breaks frequently.

Do not use the auger in the rain. The possibility of your slipping is increased when the ground is wet.

Do not use the auger indoors or in poorly ventilated places.

Do not smoke in the vicinity of the auger. This equipment runs on gasoline. Keep the equipment from lames and sparks.

Do not remove the gas cap or refuel while the engine is running or hot.

Wipe the auger body of any spilled gasoline after refueling. 

Store fuel in approved containers and keep in a cool place.

Содержание GroundDrill-12



































Отзывы: