AD Boivin 2002 Snow Hawk, Руководство по обслуживанию

Страница: 39 / 173

ENGINE REMOVAL 4- 2
1
1
4
7
Front fork
o
Remove the nut retaining the forward tie-rod end of the
steering shaft to the upper triple clamp. (No. 1)
o
Then, remove the two fork pivot bolts and nuts (No. 4)
that secure the front fork and remove it from the vehicle.
Recoil starter
o
With a small screwdriver, push the knot out of the
recess in the starter handle. Since it is often easier, cut
the cord just before the knot while holding the cord
securely so that it does not slip from your hands and go
into the recoil housing. Make a new knot in the cord
once the starter handle has been removed to keep it
from doing this.
Air exhaust duct
o
Remove the mounting screw (No. 1) from the duct and
remove it from the vehicle (be careful not to drop the
screw).