45
皇晶科技股份有限公司
Acute Technology Inc.
Copyright
2018
Stack Delay
When MSO is triggered successfully, the Trig-Out signal is transmitted through Cable
to the DSO with a time delay, resulting in a time phase deviation between the logic
and the analog waveforms. Therefore, the stack delay time must be set to
compensate the delay. In the waveform display screen, you can put the mouse on the
top of the DSO
waveforms, hold down the Shift key, and then use the left mouse button
to drag the DSO waveforms to the appropriate location to complete the stack delay