© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
BII 48865 (1303)
3 of 25
2.
Using isopropyl alcohol on a shop towel, clean the
area where the ID label will attach.
NOTE: The remote is factory set for driver 1 remote
control. To program the driver 2 remote, follow the
“REMOTE CONTROL ENGINE STARTER
TRANSMITTER REGISTRATION” instructions on
ISIS.
3.
Attach the “DRIVER 1” ID label to the transmitter in
the area as shown.
QB20939DH
ID LABEL
TRANSMITTER
Clean with
isopropyl
alcohol.
4.
Using a plastic trim tool, remove the left and right
lenses from the front roof module (two retaining tabs
for each lens).
5.
Remove the front roof module (two bolts, six
retaining tabs, and unplug the vehicle connectors).
6.
Remove the driver’s and passenger’s sunvisor
holders.
QB62650AK
VEHICLE
CONNECTORS
FRONT
ROOF
MODULE
2 BOLTS
RIGHT LENS
2 RETAINING
TABS
2 RETAINING
TABS
6 RETAINING
TABS
PLASTIC
TRIM TOOL
LEFT
LENS
QB62701AK
DRIVER’S
SUNVISOR HOLDER
(Rotate.)
PASSENGER’S
SUNVISOR HOLDER
(Rotate.)
