2 of 25
BII 48865 (1303)
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory User’s Information Manual
Quick Start Guide
TOOLS AND SUPPLIES REQUIRED
Flat-tip screwdriver
Phillips screwdriver
Ratchet
10 mm and 12 mm Sockets
Isopropyl alcohol
Shop towel
Tape measure
Scissors
HDS/MVCI
Masking tape
Diagonal cutters
Ruler
Electrical tape
Pushpin
Felt-tip pen
File
Eye protection (face shield, safety goggles, etc.)
Drill
3 mm and 6 mm Drill bits
The following tool is available through the Honda Tool and
Equipment Program. On the iN, click on: Service >
Service Bay > Tool and Equipment Program, then enter
the number under “Search”. Or, call 888-424-6857.
• Plastic Trim Tool (T/N SILTRIMTL10)
Illustration of the Remote Control Engine Starter in
the Vehicle
INSTALLATION
1.
Disconnect the negative cable from the battery.
Client Information:
The information in this installation
instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
QB20801AK
ANTENNA
3 RELAYS
3A, 40A
FUSES
CONTROL
UNIT
ENGINE
STARTER
HARNESS
