20 of 25
BII 48865 (1303)
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
62. Unplug the vehicle 10-pin connector, and plug it into
the engine starter harness 10-pin connector. Plug
the remaining engine starter harness 10-pin
connector into the wiper switch.
QB22402BK
ENGINE STARTER
HARNESS 10-PIN
CONNECTOR
ENGINE STARTER
HARNESS 10-PIN
CONNECTOR
VEHICLE
10-PIN
CONNECTOR
WIPER
SWITCH
63. Using one wire tie, secure the engine starter harness
to the vehicle harness.
NOTE: Make sure that the connectors and harness
are not pinched, or are not interfering with the
steering wheel when it is moved for adjustment.
64. Using isopropyl alcohol on a shop towel, clean the
area where one urethane tape will attach.
65. Attach the urethane tape to the lower column cover
in the area as shown.
QB22801BK
WIRE
TIE
VEHICLE
HARNESS
ENGINE
STARTER
HARNESS
Do not tighten the
10-pin connector
wire too tight.
QB22802AK
LOWER
COLUMN
COVER
URETHANE
TAPE
Clean with
isopropyl
alcohol.