User Manual of Network Zoom camera
45
Figure 6-19 Parent Directory
Child directory
: It is a sub-folder which can be created in the parent
directory. The files will be saved in a sub-folder in FTP server. The name
of folder can be defined as shown in following Figure 6-20.
Figure 6-20 Child Directory
Upload type:
To enable uploading the captured picture to the FTP server.
3.
Click
to save the settings.
4.
You can click
Test
to make sure that the FTP function is set successfully.(optional)
6.3.9 Configuring UPnP™Settings
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the
implementation of networks in the house and corporate environments.
With the function enabled, you don’tneed to configure the port mapping for each
port, and the camera is connected to the Wide Area Network via the router.
Steps:
1. Enter the UPnP™settings interface.
Configuration >Advanced Configuration > Network > UPnP
2.
Check the checkbox to enable the UPnP™function.
You can edit the Friendly Name of the speed dome. This name can be detected
by corresponding device, such as a router.
Figure 6-21 Configure UPnP Settings
