User Manual of Network Zoom camera
34
Figure 6-2 Time Settings
Configuring Time Synchronization by NTP Server
(1)
Check the checkbox to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP
server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions by NTP server.
It can be set from 1 to 10080 minutes.
Figure 6-3 Time Sync by NTP Server
You can click
Test
to make sure that the NTP server is connected.
Note
:
If the zoom camera is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the National
Time Center (IP Address: 210.72.145.44). If the zoom camera is set in a customized
network, NTP software can be used to establish a NTP server for time
synchronization.
Configuring Time Synchronization Manually
(1) Check the
Manual Time Sync
checkbox.
