SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0
Configuration Menu Reference
35
Figure 4.8. Configuring scheduled file close every 1 megabyte
(1048576 bytes) of data received.
4.3.5
Time stamp incoming lines
The SDR2-CF allows you to add the time and date to each line of incoming
data. Time stamping is triggered by reception of a character of your choice.
Typically, the line feed character (ASCII code 10) is a good choice since a
line feed character usually precedes each new line from the data source (see
Figure 4.9).
However, some devices output only a carriage return (ASCII code 13) at the
end of each line. Consult your documentation or try line feed, then carriage
return if you don't see time stamps in your data.
Time stamps are written in MM/DD/YY HH:MM:SS format.
